socomec DIRIS A40 ETHERNET - Programming; Ethernet Configuration on Diris A40;A41

DIRIS A40/A41 - RS485 - ETHERNET
®
7
DIRIS A40/A41 - Ref.: 536 181 B GB
GB
PROGRAMMING
ETHERNET CONFIGURATION ON DIRIS A40/A41
This involves setting up the IP parameters for the
DIRIS connected to the gateway
IP address (Rth Adr IP) :
[CLASS A].[CLASS B].[CLASS C].[CLASS D]
Subnet mask (Eth MASH) :
[CLASS A].[CLASS B].[CLASS C].[CLASS D]
Gateway (Eth GATE) :
[CLASS A].[CLASS B].[CLASS C].[CLASS D]
DHCP activation (Eth DHCP) : Yes/ No
The factory setting is:
• IP address: 192.168.1.1
• Subnet mask: 255.255.255.0
• Gateway: 0.0.0.0
• DHCP activation: NO
x 4
x 4
x 4
x 1