socomec MDO 1600 TS - Technical Features

SOCOMEC
43014 Medesano – Strada Ferrari, 38
PARMA ITALY
CE
2 Technical Features
2.1 Use
The hammer has been projected and manufactured for all types of demolitions, on any kind of
material, to drive poles, to cut and break asphalt surfaces.
The manufacture is in accordance with the European Directive 2006/42/CE and with the
Noise Directive 2000/14/CE.
Socomec S.p.A. warrants that its machines are manufactured according to the regulation
quoted up-above and puts the marking “CE” on them.
SERIAL NUMBER
MODEL
YEAR OF MANUFACTURE
TECHNICAL FEATURES
8
Page
of
48
2
Nederland B.V.