12
SUNSYS H30-H30i - Ref.: IOMSUNHMXX04-GB 00
12
Table 3.2-1 List of shipped goods
Object Description
1 PV inverter Photovoltaic inverter
2 Installation and operating manual
Instructions aimed at providing information concerning safety, installation proce-
dures, specifications, etc.
3 Quick start Illustrative sheet for inverter commissioning
4 AC connector Connector for AC connection
5 DC connectors Polarised connectors for connection (DC+ and DC-)
6 Earth cable fixings Screw, nut and M6 washers for external earth cable fixing
7 Wall mounting bracket Bracket for wall mounting of the inverter
8 Screw anchors and screws Fixing the bracket to the wall
9 M6 nuts Fixing the inverter to the bracket
10 Outer guard cover Covering the connections
11 M4 screws For fixing the outer guard cover to the inverter
Warning!
If any external or internal inverter damage is detected, or if any of the packaged accessories are damaged or
missing, please contact your inverter supplier.
3. INSTALLATION
3.1. Before installation
Due to the variety of potential user installation environments, reading this chapter carefully before installation is strongly recommended.
All installation and start-up procedures must be undertaken by qualified and well-trained technicians.
3.2. Checking the packaging
Unforeseen events may occur during transportation. Make sure the packaging is not damaged. Once the packaging has been
opened, proceed as follows:
1 Make sure the inverter model and specifications match those requested.
2 Make sure the inverter is not damaged.
3 Make sure all the accessories have been included; accessories supplied as standard are listed in the table below.
Quick start guide
INSTALLATION AND
OPERATING MANUAL
3.2-1
Packaging
1
2
3
4
5
6
9
8
11
10
7
To Next Page
Loading...