USER GUIDE ST32BV
SAFETY INSTRUCTIONS
The ST32BV has been designed for leisure and high level competition.
Its design, which complies with the pending rules of the CIK, ensures an optimum safety in
normal working conditions.
Its high speed and performances imply a proper maintenance.
• For your safety and the one of other pilots, please thorou
g
hly respect :
- The assembly instructions.
- The adjustment recommendations.
- The maintenance plan.
• Please pay especial attention to the instructi
o
ns or comments to the following symbols
below :
NOTE: Gives useful information.
: indicates a high risk of severe injury if the instructions are not
followed.
Sh
ould you not find an answer to your questions in this manual or face any problem, please
get advice from the SODIKART distribution network.
The SODI ST32BV is designed for safety and reliability in normal conditions of use.
Before using it, please read this manual and carefully follow the instructions. By not
doing so, you might be exposed to a risk of severe, even fatal injury, and your kart
might suffer damages.
The SODI chassis can only be used on an approved track and by a driver who is in
possession of a valid membership card of the go-kart’s federation of his own country.
Prior to going on the track, please check all points related to safety.
In order to avoid fire, put the kart at least one meter away from the buildings. Never
leave inflammable objects close to the kart.
If fuel has been poured, wipe and wait for vapors to dissipate, before starting the
kart.
Kids and domestic animals have to be kept away from the kart and the track.
Never drive the kart without adequate pilot equipment.
- 3 –
EDITION : JANUARY 2010 MAN038.011
To Next Page
Loading...
