www.soehnle-professional.com
1. GENERAL INFORMATION
1.1 Intended use
Scales with the Soehnle Professional Terminal Basic 3700 are designed for weighing,
component adding and taring for non-approvable applications.
1.2 Safety instructions
Please read through the information in this user manual carefully before starting up. It
contains important information concerning the installation, correct use and maintenance of
the equipment.
The manufacturer will not be liable if the user does not observe the following instructions:
When using electrical components with higher safety requirements, you must follow the
appropriate regulations. Never carry out work on the equipment while it carries live voltage.
Improper installation will invalidate the warranty.
The electrical connection conditions must be consistent with the rating values printed on the
power supply unit.
The equipment is designed for use indoors. Pay attention to the permitted ambient
temperatures for operation (see Technical Data). This equipment meets the requirements for
electromagnetic compatibility. Do not exceed the maximum values specified in the
standards.
If you have any problems, please contact your Soehnle Professional service partner.
1.3 Cleaning
The equipment can be cleaned simply with a damp cloth and a commercially available
cleaning product.
Do not use abrasive cleaning agents.
To Next Page
Loading...
Need help?
General