Safety instructions
Before using the device, please read all of the safety instructions listed below and pay attention to them when using the device.
Disregard of safety instructions can lead to malfunction or total breakdown of the device. The manufacturer's warranty is not valid if
it is discovered the reason of breakdown because of failure to follow the safety instructions below.
1. Do not connect the device to a computer or USB connector when you are using normal (AAA) batteries. This may lead to
battery fire outbreak or explosion. You should only use the USB connector charger with rechargeable batteries.
2. This device is not waterproof. You should avoid getting the device wet or use it in areas with high humidity. An exception to
this would be when using the device in water quality defining mode. When measuring water quality, you should only dip
the probe in water.
3. You should avoid dropping the device and other physical impacts that can lead to damages to the device.
4. Do not leave the device for exposed to sunlight or high temperatures for a significant period of time. This can lead to
electrolyte leakage from the battery and can cause the device to malfunction.
5. Do not leave the device for long period of time near devices that generate strong magnetic fields. For instance, do not leave
it near magnets and electric motors. Also, keep the device away from places where strong electromagnetic signals are
generated. For example, near radio transmissions.
6. Do not perform measurements in proximity to mobile phones and microwave ovens as this may lead to distortion in the
device's measurement.
7. Do not try to pull apart the device or fix it yourself.
8. When setting up batteries, beware of battery polarity. Incorrect placement of the battery may result in the device
malfunctioning.
To Next Page
Loading...
Need help?
General
