2.5 Battery and charger
The range of the battery may differ from the specifications depending on the temperature, the condition of the track, the incline and the weight
of the driver.
Charging the battery
Make sure that the charging connector and the charger are dry and that the SOFLOW SCOOTER is switched off. Connect the charger cable to
the SOFLOW Scooter's charging connector and plug it into an electrical outlet. The charging light on the charger should glow red. When the
charging light changes from red to green, the battery is fully charged. Disconnect the charger from the power source and the SOFLOW Scooter.
The e-SOFLOW Scooter should only be charged with the original charger. Ensure that the voltage supply is correct. Do not use the charger if
the charger or power cable are damaged. Please contact the service department. For optimum battery life, charge and store the e-SOFLOW
Scooter in a dry and clean environment, preferably room temperature. The charging time of the SOFLOW Scooter is approximately 4-6 hours.
There will be negative effects on the battery life if the charger remains permanently connected to the SOFLOW Scooter and the power source.
Battery handling
To Next Page
Loading...
