Note: When you lock the scooter, it remains in standby mode and continues to use power. You can switch off the scooter to reduce power
consumption. In this case, the motor will no longer be blocked until the scooter is switched on again. When you turn the power back on, the
block will remain in effect until you deactivate it.
When you use SoFlow App to connect to the scooter, it is suggested to keep internet connection with the phone. If the phone loses the internet
connection, keep SoFlow app open in the background. By doing this you can continue using all the app functions including NFC. If you close
the app completely while not having internet connection, you can only connect again to the scooter after internet connection is available again
6 Technical data
* depending on the rider’s load, ground, inclination, temp. Etc
To Next Page
Loading...
