Sojag SUNSHELTER - User Manual

Assembly Manual
Sunshelter 10 x 12 ft.
Exact dimension of the roof, corner-to-corner: 116.3x 141.7 inch
Min. dimension suggested for the base: 114 x 140 inch
Sojag code: 500-6160376
UPC code: 772830160376
Guide d’assemblage
Abri-soleil 3 x 3,65 m
Dimension exacte du toit, coin à coin : 296 x 116 cm
Dimension min. recommandée pour la base : 290 x 355 cm
Code Sojag : 500-6160376
Code CUP : 772830160376
© Sojag inc. 2016
Hard Top Sun Shelter
Assembly Instructions
IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
Consult with your local governing authority / local municipality codes regarding
installation of temporary structures before assembly. Some jurisdictions may
require permits for, or otherwise regulate, installation and use.
For parts and customer service, please call 1-855-659-4402 in Canada and U.S.
(English and French) Monday to Friday , from 8:30 AM to 4:30 PM, EST.
Abri-soleil à toit rigide
ITM. / ART. 852897
Instruction d’assemblage
IMPORTANT : GARDER POUR RÉFÉRENCE FUTURE, LIRE ATTENTIVEMENT
Veuillez consulter vos autorités municipales avant de compléter l’assemblage
d’un abri temporaire. Certaines municipalités demandent un permis
ou réglementent l’installation ou l’utilisation de l’abri.
Pour contacter le service à la clientèle ou pour commander des pièces,
composer le 1-855-659-4402 au Canada et USA (français et anglais)
du lundi au vendredi, de 8 h 30 à 16 h 30, HNE.

Summary

Operation

Solariums, Mural Solariums, and Hard Top Gazebo

Details for solariums, mural units, and hard top gazebos.

Fabric Roof Sun Shelters

Specific instructions for sun shelters with fabric roofs.

Garden Swings

Guidelines for the assembly and use of garden swings.

Safety Information

For All Products

Essential safety precautions applicable to all products in the manual.

Care and Cleaning

For All Products

Instructions for cleaning and maintaining all Sojag products.

Planning Assembly

For All Products

Consumer responsibilities and general planning steps before assembly.

Products with Polycarbonate Roof Panels

Important notes for installing polycarbonate roof panels correctly.

Tools Required

List of tools needed for product assembly, not included.

Hardware Kit

Parts List

Parts List (Continued)

Personalize Your Shelter

Assembly

Step 1

First assembly step, focusing on base structure and column attachment.

Step 2

Second assembly step, installing optional curtains or mosquito nets on tracks.

Step 3

Third assembly step, connecting structural frame elements using screws.

Step 4

Fourth assembly step, joining main frame components with specific hardware.

Step 5

Fifth assembly step, securing joint cover plates to the frame.

Step 6

Sixth assembly step, reinforcing the structure with key bars.

Step 7

Seventh assembly step, attaching corner roof bars to the frame.

Step 8

Eighth assembly step, placing and securing the main roof structure.

Step 9

Ninth assembly step, installing roof finishing bars to complete the frame.

Step 10

Tenth assembly step, attaching outer roof connectors for structural integrity.

Step 11

Eleventh assembly step, installing the left, right, and middle roof panels.

Step 12

Twelfth assembly step, installing roof support bars into the tracks.

Step 13

Thirteenth assembly step, installing remaining roof panels.

Step 14

Fourteenth assembly step, securing roof finishing bars and ends around the unit.

Step 15

Fifteenth assembly step, installing optional mosquito nets and curtains.

Sojag SUNSHELTER Specifications

General

Category	Outdoor Furnishing
Type	Gazebo
Frame Material	Aluminum
Roof Material	Galvanized Steel
Material	Aluminum, Steel
UV Protection	Yes
Water Resistance	Yes
Installation	Assembly required