EasyManua.ls Logo

SOLAC LUCID i10 - Battery Removal Procedure; Safe Battery Removal Steps

SOLAC LUCID i10
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
- CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
- CAUTION: the appliance must be disconnec-
ted from the supply mains when removing the
batteries.
- To remove the batteries, once the life of the
appliance, proceed as follows:
- Unscrew the screw of the battery cover and
remove the cover.
- Disconnect the plug between the battery and
the robot.
This appliance complies with Directive 2014/35/
EU on Low Voltage, Directive 2014/30/EU on
Electromagnetic Compatibility, Directive 2011/65/
EU on the restrictions of the use of certain
hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on
the ecodesign requirements for energyrelated
products
- Remove the side brushes using a damp cloth
to clean them.
CLEANING ROBOT’S SWIVEL WHEEL:
- Remove the castor wheel and then use the
selfcleaning brush to clean the dust.
CLEANING ROBOT’S ANTIFALLING
SENSORS:
- Para un buen funcionamiento de los sensores
extrae el polvo a menudo con el cepillo de
autolimpieza o un po seco.
- Volver a colocar las piezas de jacn de los
cepillos laterales.
CLEANING ROBOT’S LOAD CONTACT
POINTS:
- Clean the automatic loading poles and load it
with the cleaning cloth and a dry cloth.
REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
classication and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended; take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
This symbol means that product may
include a battery or batteries; user must
to remove them before disposing of the
product. Remember that batteries must
be disposed of in duly authorised containers. Do
not dispose of them in re.

Related product manuals