ANOMALIES
- In case of detecting any anomaly, check the following table:
ERROR Nº BLINKS AND BEEPS LIKELY CAUSE WHAT TO DO
1
SOLID RED INDI-
CATOR LIGHT
BEEP ONCE Front caster wheel
is stuck
“Clean the front caster
wheel and press the
power button to restart
the Robot.”
2 BEEP TWICE Robot’s side
brush probably
stuck
“Clean the side brush
and press the power but-
ton to restart the Robot.”
3 BEEP TRIPLE "Robot's vacuum
fan is stuck or its
lter is clogged.”
“Remove and empty
Robot’s bin. Clean
Robot’s lter.Then, bris-
kly tap the bin to loosen
any remaining trapped
debris.”
4 BEEP QUARTIC Robot’s rolling
brush can’t turn.
“Remove and clean
Robot’s rolling brush and
caps.”
5
BREATH RED
INDICATOR
LIGHT
BEEP TWICE Bumper is stuck. Check whether the bum-
per is exible.
6 BEEP TRIPLE Robot’s cliff sen-
sors are dirty or it
is stuck on a dark
surface.
“If Robot is hanging
over a drop,or on a dark
surface, start in a new
location. Otherwise,wipe
its cliff sensors with a dry
cloth.”
7 BEEP QUARTIC “Robot cannot
return to its
Charging Dock or
starting position.”
“Ensure there are no
obstacles in front of
the Charging Dock or
starting position.Wipe
the Charging contacts on
both the Charging Dock
and robot with a clean,
dry cloth.”
To Next Page
Loading...
