SolarEdge SE6000 User Manual

 SE15K SE16K SE17K SE25K SE27.6K SE33.3K Unit
Reverse-polarity
protection
Yes 
Ground-fault isolation
detection
700 kΩ Sensitivity
350 kΩ Sensitivity
(1)

Overvoltage category III 
Maximum inverter
efficiency
 98 98.3 98.1 %
European weighted
efficiency
97.6 97.7 98 %
Night-time power
consumption
< 2.5 < 4 W
Additional Features
Supported
communication
interfaces
(2)
RS485, Ethernet, ZigBee (optional), Wi-Fi (optional),
Built-in GSM (optional)

Smart Energy
Management
Export Limitation, Home Energy Management
Arc Fault Protection Integrated, user configurable (according to UL1699B) 
Rapid Shutdown
Optional
(3)
(Automatic upon AC grid disconnect)

DC Safety Unit (optional)
2-pole Disconnection N/A 1000V / 40A 
DC Surge Protection N/A Type II, field replaceable 
DC Fuses on Plus &
Minus
N/A Optional, 20A 
Compliance N/A UTE-C15-712-1 
Standard Compliance
Safety IEC-62103 (EN50178), IEC-62109, AS3100 
(1)
Where permitted by local regulations
(2)
Refer to Datasheets -> Communications category in Downloads page for specifications of optional communication
options: http://www.solaredge.com/groups/support/downloads
(3)
Inverter with rapid shutdown part number: SExxK-RWROOBNN2; available for SE25K and SE27.6K
-Three Phase System Installation Guide MAN-01-00057-4.1
110 Technical Specifications - Three Phase Inverters (Europe &APAC)

SolarEdge SE6000 Specifications

General

Brand	SolarEdge
Model	SE6000
Category	Inverter
Language	English