For the most current Installation Instructions, please visit www.solatube.com/instructions
Solatube International, Inc. | 2210 Oak Ridge Way | Vista, CA 92081-8341 | www.solatube.com | T: 888.SOLATUBE
© 2014 Solatube International, Inc. Part No. 951780 v2.7
1
Solatube
®
Brighten Up
®
Series
Solatube
®
160 DS Daylighting System
Solatube
®
290 DS Daylighting System
Installation Instructions
Parts List *
Quantity
1
Dome with Raybender® 3000 Technology (1)
a. Shock Inner Dome*
†
2 Roof Flashing (pitched or no pitch) (1)
3
Top Tube Assembly including: Dome Ring, Dome
Ring Seal, Spectralight® Innity Top Tube with
Angle Adapter.
(1)
4
Spectralight® Innity 16 in (400 mm) Extension
Tube (not included in some kits, see label on box)
(2)
5
Bottom Tube Assembly including: Spectralight®
Innity Bottom Tube with Angle Adapter, Ceiling
Ring
(1)
6
Effect Lens (1)
7 Diffuser (1)
Seal and Fasteners
a. Dome Ring Screws - #8 X 1 in (25 mm) (5)
8
b. LightTracker™ Reector (1)
c. Flashing Screws - #10 X 2 in (51 mm) (8)
d. Roof Sealant (1)
e. Expansion Joint Seal (1)
f. Tube Screws - #8 X 9/16 in (14 mm) (10)
g. Foil Tape - 2 in (51 mm) X 18 ft (5.5 m) roll (1)
h. Drywall Screws - #6 X 1 5/8 in (40 mm) (4)
3
Required Tools:
Keyhole Saw
Saber or Reciprocating Saw
Hammer
Flat Bar
Utility Knife
Tape Measure
Caulking Gun
Screw Gun with Phillips Head
Lumber Crayon
Magnetic Compass
Required Safety Equipment
4
5
2
7
6
8f
8d
8b
8e
8a
8c
1a
1
8h
*
†
High Velocity Hurricane Zones: Shock Inner Dome must be installed
with dome. To meet HVHZ requirements, use a six inch no pitch
ashing or a pitched ashing with a four inch turret extension.
8g
*Components shown not included in all kits, see label on box.