Need help?Do you have a question about the SolaX Power SK-TL5000 and is the answer not in the manual?
General| Model | SK-TL5000 |
|---|---|
| Rated AC Power | 5000W |
| Max. AC Power | 5500W |
| Number of MPPTs | 2 |
| Max. Input Current | 26A |
| Max. Input Current per MPPT | 13A |
| THDi | <3% |
| Topology | Transformerless |
| Cooling | Natural Convection |
| Protection Degree | IP65 |
| Type | String Inverter |
| Rated AC Voltage | 230V |
| AC Voltage Range | 180-280V |
| AC Grid Frequency | 50/60Hz |
| DC Switch | Yes |
| Protection | DC reverse polarity, AC overcurrent, DC overvoltage, AC overvoltage, AC undervoltage, Islanding, Over temperature, Ground fault |
| Operating Temperature Range | -25°C to +60°C |
| Communication | WiFi/GPRS (optional), RS485 |
Provides critical warnings and precautions for safe operation and handling of the inverter.
Covers essential safety aspects of PE grounding and managing leakage current.
Details the DC input voltage, current, and MPP parameters for the inverter.
Provides technical data for the inverter's AC output, including voltage, current, and frequency.
Presents efficiency ratings and safety/protection features of the inverter.
Outlines the electrical specifications for the X-Hybrid BMU unit.
Important safety and environmental considerations for selecting an installation site.
Step-by-step instructions for physically mounting the inverter and its bracket.
Details on how to connect PV strings to the inverter, including voltage limitations.
Instructions for connecting the inverter's AC output to the grid or load.
Steps for connecting the battery to the SK-SU series inverter for storage systems.
Instructions for connecting the current sensor to monitor grid power flow.
Explains how to connect the EPS (Emergency Power Supply) feature for backup power.
Provides a guide to identifying and resolving common faults and error messages.
To Next Page