How to fix water on the floor near my Soleus Air Dehumidifier?
If you find water on the floor near your Soleus Air Dehumidifier, it could be due to a disconnected or loose drain tube. Ensure the drain tube is correctly installed onto the drain port located on the back of the unit. Also, verify that the drain tube connection is secure.
Why won't my Soleus Air DMG-135-60 Dehumidifier turn on?
Your Soleus Air Dehumidifier might not be turning on because a fuse has blown or a circuit breaker has tripped. Check your house's fuse or circuit breaker box. If you find a blown fuse, replace it. If a breaker has tripped, reset it.
What to do if my Soleus Air DMG-135-60 Dehumidifier is on, but the fan is not running?
If your Soleus Air Dehumidifier is on but the fan isn't running, it could be for a couple of reasons. First, the dehumidifier might have reached the humidity level you set on the control panel, which automatically turns it off. To keep it running, lower the humidity setting or switch to Continuous Mode. Another possibility is a recent power failure. There's a protective time delay (up to 3 minutes) to prevent the compressor from overloading, so the unit might not start dehumidifying right away after being powered back on.
Recommended humidity settings for different seasons and applications.
Explains normal operation aspects like warm air exhaust and reduced moisture removal.
Explanation of initial water presence due to factory testing.
List of items included in the dehumidifier package.
Detailed technical specifications of the dehumidifier model.
High moisture removal capacity and precise humidity control.
Features like dual fan, auto defrost, variable fan speeds, and low temp operation.
Features for data logging, drainage, portability, and power reach.
How to adjust and secure the handle to the desired height.
Instructions for connecting the drain tube for automatic drainage.
Description of the dehumidifier's control panel layout and functions.
How to turn the unit on/off and select operating modes.
Setting desired humidity levels and fan speeds.
Manual draining and setting date, time, and timer functions.
How to program the unit for automatic ON or OFF timers.
Inserting, recording data, and viewing reports from the SD card.
Explanation of the automatic draining process during operation.
Guidance on selecting the best location for effective dehumidification.
How the automatic defrost system works when frost builds up.
Guidance on when and how to replace the air filter.
Instructions for cleaning the exterior of the dehumidifier.
Steps to drain the tank and prepare the unit for storage or transport.
Solutions for the dehumidifier not starting or not drying effectively.
Troubleshooting for unit running too much or frost appearing on coils.
Information on normal fan noise and other minor operational issues.
Solutions for water leaks and the unit failing to power on.
Troubleshooting for fan issues and unit cycling off when target humidity is met.
Descriptions and resolutions for common self-diagnosing error codes (E4, E2, E3, E5).
Details on the two-year components and five-year compressor limited warranty.
What the warranty does not cover and liability limitations.
Steps for preparing the unit for transport and initial setup.
Overview of operation modes, fan speeds, and control panel buttons.
Steps for preparing the unit after use and setting time/date.
General| Model | DMG-135-60 |
|---|---|
| Type | Dehumidifier |
| Daily Moisture Removal Capacity | 60 Pints |
| Operating Temperature | 41°F to 95°F |
| Voltage | 115V |
| Energy Star Rated | Yes |
| Coverage Area | 3, 000 sq. ft. |
| Features | Continuous drain option |
To Next Page