Why is water dripping inside the room from my Soleus Air WS3-06E-201 Air Conditioner?
Water may be dripping inside from your Soleus Air Air Conditioner if the unit isn't correctly tilted towards the outside; ensure it's slightly tilted downward from the front to the rear for proper drainage. Also, check the drain plug at the front, bottom-left side of the unit and firmly press on it to ensure it is plugged.
Why does water collect in the base pan of my Soleus Air Air Conditioner?
Water collecting in the base pan of your Soleus Air Air Conditioner is normal. It happens because moisture removed from the air drains into the base pan. This is normal for a short period in areas with low humidity and normal for a longer period in areas with high humidity.
Why is my Soleus Air WS3-06E-201 Air Conditioner dripping water outside?
If your Soleus Air Air Conditioner is dripping water outside, it is normal, especially in hot and humid weather.
What to do if the Soleus Air WS3-06E-201 Air Conditioner remote control is not working?
If the Soleus Air Air Conditioner remote control isn't working, first check the position of the batteries, ensuring they are correctly inserted. If the issue persists, replace the batteries.
Essential guidelines to prevent fire, electric shock, or injury during operation and handling.
Explains the Leakage Current Detection and Interruption (LCDI) plug and its testing procedure.
Important warnings regarding the use and limitations of the power cord and plug.
Emphasizes the importance of the grounding prong and warns against its removal or bypass.
Guides on preparing the window, checking dimensions, and adapting for storm windows.
Steps to take before installing, including airflow checks, outlet verification, and careful unpacking.
Step-by-step guide for correctly attaching the window mounting blocks.
Detailed procedure for lowering and centering the air conditioner onto the window sill.
Instructions for affixing the window slider support brackets to the air conditioner sides.
Connecting and sliding the window panels into place.
Instructions for applying the top foam seal.
Diagnoses for unplugged units, tripped breakers, power failures, and LCDI plug issues.
Solutions for restricted airflow, incorrect temperature settings, dirty filters, and warm rooms.
General| Type | Window Air Conditioner |
|---|---|
| Cooling Capacity | 6, 000 BTU |
| Voltage | 115V |
| Amperage | 5.2A |
| Fan Speeds | 3 |
| Power Supply | 115V/60Hz |
| Power Consumption (Cooling) | 550W |
| Refrigerant | R32 |
| Window Kit Included | Yes |
| Remote Control | Yes |
| Timer | 24-Hour |
| Filter Type | Washable |
| Noise Level (Low) | 52 dB |
| Coverage Area | 150-250 sq ft |
| Operating Modes | Cool, Fan |
To Next Page