EasyManua.ls Logo

Solid State Cooling Systems THERMOCUBE 200 - Page 29

Solid State Cooling Systems THERMOCUBE 200
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THERMOCUBE 200/300/400 THERMOELECTRIC CHILLER MANUAL 52-11300-1
SOLID STATE COOLING SYSTEMS, 167 MYERS CORNERS ROAD, WAPPINGERS FALLS, NY 12590 28
TELEPHONE: (845) 296-1300 FAX: (845) 296-1303 WEB: WWW.SSCOOLING.COM VERSION M28
NFPA Rating (estimated)
Health: 1
Flammability: 1
Reactivity: 0
Water Reactivity: 0
3. COMPOSITION / INFORMATION ON INGREDIENTS
Ingredients
CAS No.
EINECS No.
Conc. %
Distilled Water
7732-18-5
231-791-2
70 – 75
Propylene glycol
57-55-6
200-338-0
25 – 30
Others (Proprietary)
-
-
0.2 – 2.0
4. FIRST AID MEASURES
In case of eye contact: Rinse thoroughly with plenty of water for at least 20 minutes. If irritation
remains, consult a medical doctor immediately.
In case of skin contact: Remove contaminated clothing. Wash with soap and plenty of water for at
least 20 minutes. If irritation remains, consult a medical doctor immediately.
If inhaled: Move person to fresh air. If not breathing, give artificial respiration and immediately
contact emergency medical assistance.
If ingested: Never give anything by mouth to an unconscious person. Rinse mount with water and
consult a medical doctor immediately.
Other medical attention: Medical persons should be aware of protective measures for handling.
Potential health effects: May be harmful or fatal if swallowed.
5. FIRE-FIGHTING MEASURES
Flash Point: 118°C (Cleveland open cup)
Suitable extinguishing media: Water spray, alcohol-resistant foam, dry chemical, carbon dioxide
Specific hazards arising from the chemical: No data available
Special protective equipment for fire fighters:
- Use water spray to cool unopened containers.
- Fire fighters should enter area wearing respiratory protection and protective equipment.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions:
Ensure adequate ventilation.
Remove all sources of ignition.
Avoid contact with skin and eyes.
Avoid inhalation of vapor, mist, or gas.
Environmental Precautions:
Follow local regulations.
Methods and materials for containment and clean-up:
Collect with non-combustible absorbent materials (sand and soil).

Related product manuals