Solid State Cooling Systems THERMOCUBE 200 - Section 3; Hook U P

THERMOCUBE 200/300/400 THERMOELECTRIC CHILLER MANUAL 52-11300-1
SOLID STATE COOLING SYSTEMS, 167 MYERS CORNERS ROAD, WAPPINGERS FALLS, NY 12590 7
TELEPHONE: (845) 296-1300 FAX: (845) 296-1303 WEB: WWW.SSCOOLING.COM VERSION M28
SECTION 3
H
OOK UP _______________________________________________________
Figure 3A
Figure 3B
Figure 3C
Process Fluid Supply
(¼" push push-in-fittings)
On/Off Switch
Signal Connector
9-Pin D-sub
Fill Cap
Display Screen
Controller Input Buttons
Handle
Power Inlet Module
IEC 320 power inlet module with two 5X20
fuses
Optional 5-micron particle filter
Fasten the filter-mounting bracket
via the four screws located here