Need help?Do you have a question about the Solid State Cooling Systems ThermoCube and is the answer not in the manual?
Standards related to electromagnetic emissions compliance.
Standards related to electromagnetic immunity.
Directives and standards pertaining to electrical safety.
Standards for emissions compliance including FCC, ICES, and ACMA.
Standards for safety compliance including UL and CAN/CSA.
General warnings and operational precautions for safe use of the equipment.
Explanation of hazard warning and caution symbols used within the manual.
Details power input, fuse specifications, and alarm signal wiring.
Describes fluid inlet and outlet quick disconnect fittings.
Specifies required airflow clearance around the unit for proper performance.
Instructions for opening, filling, and closing the coolant reservoir.
Basic procedure for setting a single temperature point.
Overview of menus for advanced control and settings.
Describes navigation flow between Status, Temperature, and Parameter menus.
Displays current operating status and coolant temperature.
For setting temperatures, soak times, cycles, and alarms.
For setting units, PID parameters, and auto-tune function.
Details temperature and system fault alarms and their causes.
Explanation of the automatic PID parameter tuning feature.
Guide for manually adjusting PID parameters using the Ziegler Nichols method.
Lists available configurations and the part numbering scheme.
Details the Enhanced RS-232 port, wiring, and communication protocol.
Describes standard options for alarms, filters, and temperature operation.
Describes optional features like auto-restart, RoHS compliance, and vibration dampening.
Details what is covered, duration, and reporting requirements.
Lists conditions and actions that void the product warranty.
Outlines the process for returning products for repair or replacement.
General| Brand | Solid State Cooling Systems |
|---|---|
| Model | ThermoCube |
| Category | Chiller |
| Language | English |
To Next Page
