THERMOCUBE PAO CHILLER PART # 52-400-2G-1-PAO
SOLID STATE COOLING SYSTEMS, 167 MYERS CORNERS ROAD, WAPPINGERS FALLS, NY 12590 22
TELEPHONE: (845) 296-1300 FAX: (845) 296-1303 WEB: WWW.SSCOOLING.COM VERSION M9
-SS: Stainless Steel Plumbing and Tank Option – Required/Included with PAO
With this option the standard tank and plumbing are replaced with all
stainless steel tank and plumbing. Note: This configuration option is
only available with gear pumps.
7.3 OTHER AVAILABLE OPTIONS
-AR: Auto-Restart Option
Normally upon power up, the ThermoCube does not start controlling
the coolant temperature until the START/STOP button is pressed.
With this option selected, the ThermoCube begins controlling the
coolant temperature automatically upon power up. After start-up, the
START/STOP button operates like normal: pressing this button while
running puts the ThermoCube in standby mode (no heating or
cooling), pressing this button while in standby mode initiates coolant
temperature control.
- R: RoHS Compliance
With this option we can configure the ThermoCube to use only RoHS
2 compliant components. RoHS certificates are available with this
option upon request.
-VD: Vibration Dampening Option
This option adds vibration dampening material to interior sheet metal
surfaces for applications such as scanning electron microscopes that
are highly sensitive to vibrations from pumps and fans. This option is
usually combined with the –EF external filer option which dampens
vibrations in the coolant flow.
To Next Page
Loading...
