THERMOCUBE PAO CHILLER PART # 52-400-2G-1-PAO
SOLID STATE COOLING SYSTEMS, 167 MYERS CORNERS ROAD, WAPPINGERS FALLS, NY 12590 4
TELEPHONE: (845) 296-1300 FAX: (845) 296-1303 WEB: WWW.SSCOOLING.COM VERSION M9
THERMOCUBE PAO
FOR POLY-ALPHA-OLEFIN (PAO) COOLANTS
THERMOELECTRIC CHILLER
SECTION 1
INTRODUCTION____________________________________________________________
The ThermoCube PAO chiller is a thermoelectric temperature control
system with full PID control of both heating and cooling. The wetted
surfaces of this version of the ThermoCube are made from stainless
steel or aluminum with Viton o-rings, making it compatible with all
hydrocarbons based or silicone based coolants such as PAO. It
provides 2 lpm of constant temperature coolant for controlling the
operating temperatures of lasers, military test equipment, or other
industrial applications requiring these coolants. It also has a cycling
feature where two different temperature set points may be entered with
a soak time at each temperature and the number of cycles desired. It
does not use Freon or any other replacement gas. From conception,
this chiller has been designed for long life and ease of use. The internal
thermoelectric modules have lifetimes greater than 200,000 hours.
To Next Page
Loading...
