Page 48 BASL - 02 - V03
User manual
UK
6.2 Product programming
For programming the product buttons
proceed
as follows:
Machine with cappuccino
Display Entry
Press the programming
button
.
Press the desired product
button:
Select the water quantity (ml)
with + / -. Continue with the
programming button
.
Select the coffee quantity
(grinding duration) with + / -.
Continue with the programming
button
.
Switch the preinfusion on or off
with + / -. Continue with the
programming button
.
The programming is ended.
Machine with cappuccino Æ To program the "Cappuccino"
product button
, proceed as follows:
Display Entry
Press the programming
button
.
Press the desired product
button:
Select the water quantity (ml)
with + / -. Continue with the
programming button
.
Select the coffee quantity
(grinding duration) with + / -.
Continue with the programming
button
.
Switch the preinfusion on or off
with + / -. Continue with the
programming button
.
Measure the milk quantity with
+/-. Continue with the
programming button
.
Display Entry
Select the order of the coffee or
milk output with +/- :
Coffee -> Milk
Coffee + Milk
Milk -> Coffee
Continue with the programming
button
.
The programming is ended.
Machine with cappuccino Æ To program the "Milk foam"
product button
, proceed as follows:
Display Entry
Press the programming
button
.
Press the desired product
button:
Measure the milk foam quantity
with +/-. Continue with the
programming button
.
The programming is ended.
Machine with cappuccino Æ To program the "Hot water"
product button
, proceed as follows:
Display Entry
Press the programming
button
.
Press the desired product
button:
Measure the hot water with +/-.
Continue with the programming
button
.
The programming is ended.
Ready
Product, 2x C
+ 0% ##
+ 0% #.## s
Preinfusion ON
Ready
Ready
Product, 2x C
+ 0% ##
+ 0% #.## s
Ready
Preinfusion ON
+ 0% #.## s
Coffee->Milk
Ready
Product, 2x C
+ 0% #.## s
Ready
Ready
Product, 2x C
+ 0% #.## s
Ready
To Next Page
Loading...
Need help?
General
