Need help?Do you have a question about the SOLIS Master Top and is the answer not in the manual?
General| Brand | SOLIS |
|---|---|
| Model | Master Top |
| Category | Coffee Maker |
| Language | English |
Details the operating switch, selector keys for coffee types, and programming keys.
Explains the meaning of various LEDs for operational status, maintenance, and errors.
Emphasizes supervision for children and keeping animals away from the appliance.
Covers using dry hands, checking cords, avoiding unattended use, and proper earthing.
States that only authorized technicians should perform repairs to avoid liability.
Use only for coffee, hot water, and steam; avoid extreme conditions like rain or frost.
Advise to retain packaging and protect the appliance from frost.
Fill the water container, connect the power cord, and ensure the steam knob is open for venting.
The appliance vents automatically; fill the bean container with pure coffee beans.
Wait for the green temperature indicator; the unit rinses automatically on startup.
Place cups, select coffee type/quantity, press switch. Features automatic pre-brewing.
Use the funnel for ground coffee, select quantity, and press the appropriate key.
Turn the knob to the hot water position and close when sufficient water is dispensed.
Heat milk and drinks by turning the knob to steam and using the nozzle. Clean after use.
Utilize the special accessory nozzle for faster heating and optimal frothing.
Set desired water volume by pressing keys, placing cup, and confirming.
Adjust coffee strength by setting quantity (1-6) via programming and selector keys.
Modify brewing temperature (1-6) using programming and +/- keys for personalized taste.
Details the pre-brewing option for enhanced coffee extraction, and how to enable/disable it.
Explains automatic rinsing cycles and how to configure the stand-by mode timer.
Check status of pre-brew and rinsing functions, and the automatic stand-by time.
Revert all custom settings back to the manufacturer's default values.
Modify grinder settings (1-6) while running to achieve the optimal coffee grind.
Place cups on the plate for optimal coffee temperature.
Rinse cups with hot water from the nozzle for faster pre-warming.
Clean water reservoir, drip tray, cup tray, and waste container regularly with warm water.
Remove and clean the coffee delivery system monthly using hot water and detergent.
Clean the grinder with a brush; avoid water. An electronic stone sensor protects the discs.
The brewing unit rinses automatically upon appliance startup and shutdown.
Detailed instructions for manual cleaning of the brewing unit, including removal and reassembly.
Execute the cleaning program after 250 operations using a cleaning tablet and sponge. Do not interrupt.
Follow the process for decalcifying using the agent. Indicator flashes when required. Takes approx. 45 minutes.
Rinse the system with clean water until the decalcifying indicator is off.
Address issues with the appliance not switching on or control indicator flashes.
Resolve pump noises or indicator lights by checking water tank and venting.
Fix issues like no foam, obstructed nozzles, or brewing unit removal difficulties.
Emphasizes regular cleaning, decalcifying, and seeking authorized service for longevity.
Tips on factors affecting coffee quality, including water, blend, grinding, and temperature.
Adjust grinder based on coffee flow speed (too fast/slow) for optimal extraction.
Recommended grinder position is 3-4. Adjust only when the grinder is running.
Suggests water filters, cleaning tablets, and decalcifying agents for care and maintenance.
Details voltage, power, reservoir capacity, dimensions, weight, and safety certifications.
To Next Page
