SOLIS MASTER TOP
Operating Instructions
b) Manual cleaning of the brewing
unit. At least once or twice a month,
at the latest when the indicator
flashes (after 250 operations)
the brewing unit should be cleaned as
follows:
1. Switch appliance into stand-by mode
and wait until the final rinse is finished
and the red LED is on.
2. Open the service door on the side (14)
and completely withdraw the brewing
unit by pressing the handle (marked
«press»).
3. Remove the brewing unit upward
from the appliance. The waste coffee
drawer (15) can now also be removed
for cleaning.
4. Clean residue from the brewing unit
with the brush supplied and thorough-
ly rinse in running warm water. Leave
to dry completely.
Do not clean in the dishwasher!
5. If there are still coffee residues in the
service compartment, they are best
removed with a vacuum cleaner.
6. After the cleaning is complete, insert
the waste coffee drawer and replace
the brewing unit. Note: If the brewing
unit cannot be replaced correctly, it
was probably moved during cleaning.
In this case, please adjust with the
built-in lever.
7. Move the brewing unit to the normal
position i.e. push the extractor
completely in and close the door.
On switching on the appliance, the
brewing unit is automatically moved
to the correct position.
84
To Next Page
Loading...
Need help?
General
