SOLIS MASTER TOP
Operating Instructions
Using the multi- tool setting head you
can adjust the grinder to the desired
position. The actual position is indicated
on the display:
Position 1 = fine/turn clockwise
Position 6 = coarse/turn anti-clockwise
The grinder is pre-set by the factory to
position 3–4, which means an average
fineness.
Important: The position of the grinder
may only be adjusted when the
grinder is running.
11.0 Cup pre-warming
For perfect results, not only the blend
of coffee and the quality of the water are
important but also the temperature.
11.1 Place the cups on the cup
warming plate (indirect heating by the
radiation of the heating system).
11.2 For fast pre-warming of cups, we
recommend that you rinse the cups with
hot water from the hot water nozzle.
12.0 Care and cleaning
If you always keep your SOLIS MASTER
TOP machine clean, you will be sure of
good quality coffee and will extend the
useful life of the appliance. The SOLIS
MASTER TOP is equipped with an auto-
matic rinsing program and a fixed clean-
ing program. Together with the possibility
of an additional manual hygienic cleaning
of the brewing unit, you have the assur-
ance of perfect cleanliness of the appli-
ance.
12.1 Daily and weekly care
Regularly clean the water reservoir (1),
the drip tray (6), the cup tray (5) and the
container for waste coffee (7). Simply
use hot water and, when necessary, a
non-scouring detergent.
Do not clean in the dishwasher!
82
To Next Page
Loading...
Need help?
General
