SOLIS MASTER TOP
Operating Instructions
2X
8.0 Programming
Your SOLIS MASTER TOP is pre-pro-
grammed at the factory for ideal results.
However, you have the possibility to
program the unit according to your indi-
vidual preferences.
8.1 Programming of water quantity for
the selector keys 2, 8 and 9.
Proceed as follows:
a) Press the programming key
once. The control LED is lit
b) Place a cup under the coffee delivery
system and press the appropriate
selector key (2, 8 or 9).
c) When the cup is filled to the desired
level, press the programming key
again.
The new water quantity is now
programmed until you change it by
re-programming the unit.
IMPORTANT: Programming for 2 cups
is not necessary, as this is automatically
derived from the programming for one
cup!
8.2 Programming of coffee quantity
for the selector keys 2, 8 and 9. The
strength of the coffee is determined by
the amount of coffee used and this
depends on the duration of grinding.
For every selector key you can freely
program the quantity of coffee to be used.
Proceed as follows:
a) Press the programming key
twice. The control LED is lit.
b) Press the desired selector key
(2, 8 or 9).
c) The coffee quantity set is now indicat-
ed in the programming display with a
value of from 1 to 6.
Coffee quantity display
1 (min.) approx. 6 g approx. 9 g
6 (max.) approx. 12 g approx. 16 g
78
To Next Page
Loading...
Need help?
General
