SOLIS MASTER TOP
Operating Instructions
12.2 Cleaning the coffee delivery
system
The coffee delivery system can be
removed for cleaning. Use hot water
and, if required, a non-scouring deter-
gent. Under normal conditions,
monthly cleaning is recommended.
12.3 Cleaning the grinder
Normally, the grinder cleans itself. It is
sufficient to remove residues from the
container with the brush supplied. Under
no circumstances put water in the
bean container, as this will damage
the grinding discs.
Even with the most exclusive coffee
blends it can happen that the beans
contain minute stones. The grinder is
equipped with an electronic stone
sensor, which prevents any damage to
the grinding discs. If a stone is caught in
the grinding discs, the grinder will stop
and the malfunction will be indicated on
the control display +1.
Clean the grinder as follows:
1. Unplug the appliance at the mains
supply.
2. Remove the remaining beans from
the bean container.
3. Using the multi-tool setting head,
turn the grinding discs slowly
clockwise until you can remove the
stone or other foreign body.
It is easiest to remove the foreign
body with a vacuum cleaner.
12.4 Cleaning of the brewing unit
a) Rinsing of the brewing unit. This is
done automatically when the appli-
ance is switched on and off. The rins-
ing operation takes approx. 1 minute
and is shown by the indicator (14).
83
To Next Page
Loading...
Need help?
General
