SOLIS MASTER TOP
Operating Instructions
min.
4sec.
Important: If the control indicator
flashes after switching on the appliance,
the brewing unit is not properly inserted
or the door is not properly closed.
12.5 Cleaning program (indicator
flashes).
After 250 operations, the indicator (14)
flashes and indicates that cleaning is
required. Even though you may continue
to make coffee, it is recommended to
clean the unit as soon as possible.
Before starting the cleaning program,
fill the water tank completely. Please
also empty the drip tray. Now put
a large container under the coffee
delivery system. (For this purpose, the
coffee delivery system can be moved
back or removed completely).
Proceed as follows:
1. Put a SOLITAB cleaning tablet (no
poison class) and the small yellow
circular sponge in the funnel for
ground coffee.
2. Press the cleaning key (3) for at
least 4 seconds until the cleaning pro-
gram starts. The cleaning program will
now proceed automatically and is
shown by the indicator .
Do not interrupt the cleaning
process!
After completion of the cleaning process,
which will take about 5 minutes, the
appliance is again ready to make coffee.
The completion of the cleaning
program will be indicated when the
indicator is no longer lit.
Important: If during the cleaning process
the indicator signals insufficient water
, refill the water tank and re-install.
The process will be completed automati-
cally. Under no circumstances should
the appliance be switched off during
the cleaning program!
12.6 Do not forget to manually clean the
brewing unit as described under point
12.4 b.
85
To Next Page
Loading...
Need help?
General
