Need help?Do you have a question about the SOLL Xenon and is the answer not in the manual?
General| Brand | SOLL |
|---|---|
| Model | Xenon |
| Category | Safety Equipment |
| Language | English |
Failure to comply with manual instructions can have serious repercussions and requires careful reading.
Withdraw product from service if safety is doubted or after a fall; do not attempt repairs.
Ensure product longevity and safety through correct maintenance and suitable storage practices.
Connect arrest system to carriage handle, ensuring carabiner is closed and locked.
Press release button and back of carriage to open and place over cable.
Release carriage to close automatically on cable, allowing 180° movement.
Carriage locks automatically under fall or high tension, closing tighter with more force.
Normal position allows passage; locked position engages automatically during falls or high tension.
Check anchorage device, components, cable for breaks, and intermediate anchorages for deformation.
Ensure lifeline is tensioned correctly and fall indicator is visible; contact manufacturer if not.
Check fall indicator on absorber. 'STOP' appears if absorber is activated; replace absorber and check installation.
Check lifeline pre-tension: red indicator >5mm means too high tension; green not visible means too low.
Inspect carriage for proper operation, condition, handle indexing, automatic locking, and gap between flanges.
Verify identification plate, cable tension, cable condition, crimping, absorber, attachments, posts, and bends.
Defines a competent person as someone with training and experience in safety devices and legislation.
To Next Page