Solo 200 Universal Removal Tool
• Suitable for wide range of detector makes and sizes
•
Adjustable colour coded tri-grips rotate to fit different sized detectors
•
Universal joint ensures tool remains parallel with ceiling while in use
Adjusting the Tri-grips
Yellow 64 - 76mm / 2.5 - 3.0in diameter
Blue 86 - 98mm / 3.0 - 3.85in diameter
Red 98 - 112mm / 3.85 - 4.4in diameter
Red & Yellow 74 -93mm / 2.91- 3.66in diameter
Yellow & Blue 75 - 87mm / 2.95 - 3.43in diameter
Blue & Red 92 -105mm / 3.6- 4.13in diameter
PULL AND TWIST
Instructions for use
LOCATE LOWER BUTTON FOR LOCATE UPPER BUTTON FOR
DETECTORS AT ANGLES STANDARD FITTED DETECTORS
GRIP DETECTOR TWIST AND PULL DOWN
k
S
Solo 423/4 Heat Detector Tester*
Instructions for use
• If detector does not activate within 1 minute it may be faulty
• Available in 110v and 230v versions
• Fitted with a thermal cut-out protection system
WARNING
*not available in North America
ATTATCH POWER CABLE & IF
REQUIRED, ADD OPTIONAL
EXTENSION CABLE
OPTIONAL EXTENSION CABLE SECURE CLIP
INSERT 423/4 INTO POLE CONNECT TO POWER AND
PRESS ON SWITCH
PLACE OVER DETECTOR
DO NOT TOUCH METAL GRILL DO NOT BLOCK AIR VENTS NO USER SERVICABLE PARTS
[ 6 ] [ 7 ]
To Next Page
Loading...