9 Standard delivery / 10 Specification of spray nozzles
ENGLISH 13
9 Standard delivery
Standard device
Handle with shut-off valve assembled on the high-pressure hose
Threaded collar
Spray tube with assembled nozzle attachment (only for model 463)
Spray tube and nozzle attachment including O-ring (10x2 mm) (only for models 461 and 462)
Carrying strap
Alternative nozzle with associated seal ring
Sticker for the spraying agent tank: herbicide, fungicide and insecticide
These operating instructions, the EC declaration of conformity on a separate piece of paper
10 Specification of spray nozzles
Specification Part no.
Delivery
l/min
[USgal/min]
Spraying
pressure
bar [psi]
Spraying
angle Applications
Hollow cone jet
1 mm [0.039"]
orifice, grey *
40 74 758
+ 40 74 756
0.40 [0.106]
0.55 [0.145]
1,0 [15]
2,0 [29]
50–70° For treatment of shrubs,
bushes and trees
Hollow cone jet
1.4 mm [0.055"]
orifice, black **
40 74 755
+ 40 74 756
0.64 [0.169]
0.91 [0.240]
1.11 [0.293]
1.0 [15]
2.0 [29]
3.0 [44]
50–70°
Hollow cone jet
1.8 mm [0.071"]
orifice, blue **
40 74 726
+ 40 74 756
0.88 [0.232]
1.25 [0.330]
1.53 [0.404]
1.0 [15]
2.0 [29]
3.0 [44]
50–70°
No-drift DT 1.0
yellow **
40 74 385 0.46 [0.122]
0.65 [0.172]
0.80 [0.211]
1.0 [15]
2.0 [29]
3.0 [44]
105° Mainly for herbicides
at low pressure
No-drift DT 2.0
red **
40 74 386 0.91 [0.240]
1.29 [0.341]
1.60 [0.423]
1.0 [15]
2.0 [29]
3.0 [44]
105°
No-drift DT 2.5
brown **
40 74 514 1.14 [0.301]
1.61 [0.425]
2.01 [0.531]
1.0 [15]
2.0 [29]
3.0 [44]
110°
Adjustable spray
nozzle **
49 00 206
(brass)
49 00 525
(plastic)
0.44–1.10
[0.116–0.291]
0.55–1.45
[0.145–0.383]
0.66–1.75
[0.174