Solo 467 - Parts Subject to Tear and Wear

Maintenance and care ; Technical Specifications
ENGLISH 13
8.7 Parts subject to tear and wear
Various parts are subject to application- specific or normal wear and must be replaced in good time, when
required. The following parts are subject to normal wear and are not covered by the manufacturer‘s
guarantee:
• Air filter
• Fuel filter
• All rubber parts which come into contact with fuel
• Spark plug
• Starter
9. Technical Specifications
Leaf blower 467
Engine type SOLO single cylinder two-stroke engine
Engine capacity cm
3
66,5
Bore / stroke mm 46 / 40
Max Engine power (ISO 8893) kW at rpm 2.1 / 5750
Fuel tank capacity l 1,9
Fuel mix ratio with SOLO 2T engine oil
with other two-stroke oils
1:50 (2%)
1:25 (4%)
Carburettor All-position diaphragm carburettor with primer
and integrated fuel pump
Air filter cartridge Paperstyle
Ignition Electronically controlled magneto ignition,
maintenance free
Max. Blower Air Volume * m
3
/h 1400
Max. Air Speed m/s 92
Medium idling speed rpm 2200 ± 200
Permissible speed rpm 5150 ± 200
Maximum speed of the fan * rpm 4300
Work Site related noise emission L
Peq
to EN ISO 22868; dB(A) 94 ± 2,5 dB(A)
Sound power level L
We
q
to EN ISO 22868 dB(A) 103 ± 2,5 dB(A)
Weighted effective acceleration (ISO 7916)
ISO 7916 on handle m/s
2
< 2 ± 1m/s
2
Weight kg 10,0
Dimensions without Tube mm hight: 690 / width: 550 / depth: 280
* without Tube
In the best interest of continued technological progress we reserve the right to change the design and
configuration of any product without prior notice.
For that reason, no claims can be accepted with reference to text and illustrations in this manual