- The flails are reversible, so when they become blunt on one side they can
be assembled on the other.
- Generally speaking, unless it's a question of only 1 or 2 flails, all the flails
should be replaced at the same time to prevent the occurrence of vibration.
- Even the flail rotor holder (fig. 15, ref. C) may cause vibration. If so, it
should be replaced.
- The flails wear more quickly on dry, sandy ground. In these conditions they
should be replaced more frequently.
- It is advisable to keep spare flails handy.
Fig.15
To Next Page
Loading...
