12
FIRST TIME USE
CAUTION!
Prior to using the washing machine, ensure that it is correctly installed.
Before first use, the washing machine must perform one cycle without any clothes inside
using the following steps:
• Connect the power source and water.
• Insert a small amount of detergent into the detergent drawer and close it.
• Power on the washing machine using the “On/Off” button.
• Turn the Program dial to select any program. ‘Normal’ program is recommended.
• Press the “Start/Pause” button on the appliance.
• Allow the program to complete its full cycle.
• Your machine is now ready for use.
PREPARATION PROCEDURE FOR WASHING YOUR LAUNDRY
NOTE!
If default is selected, step 3 & 4 can be skipped.
AFTER WASHING
The appliance will sound an alert after washing cycle is complete and the power supply will be powered off
automatically. Then unload the laundry.
Plug in power
1) Power On
Open tap
2) Select Program
Load laundry items
3) Select
Water Level
Add detergent
4) Select
Temperature
Close lid
5) Start up
Operation Instructions
WASHING STEPS
To Next Page
Loading...
Need help?
General
