46
General safety information
Please read and observe ...
Recommended tanning times
See the table on Page 47.
Manufacturer's guarantee
Soltron accepts liability for any tanning system defects that arise in ac-
cordance with the following regulations on behalf of customers who have
purchased an Soltron tanning system for private or commercial utilisation
from one of Soltron's sales partners; consumable parts such as UV-high
pressure lamps (burner), UV-low pressure lamps (tubes) and starters as
well as the acrylic-glass tanning bed itself are not covered by the warran-
ty.
The warranty stipulates that Soltron will eliminate any defects within a
time period predetermined by Soltron by repairing or exchanging the de-
fective part.
Claims made in accordance with this warranty can be lodged with Soltron
or the Soltron sales partner from whom the product was purchased on
presentation of the warranty card or invoice; this warranty is valid for a
period of 24 months from the date of purchase.
This does not affect the rights of the customer under the existing guaran-
tee with regard to any claims that the customer might have in accordance
with the contract of purchase.
• The time between the first two tanning sessions must be at
least 48 hours! Do not take an additional sunbath on the
same day.
• Increased tanning requires an extension of the exposure
time (= radiation time) and further intensification is not pos-
sible after a specific degree of tanning has been realised.
However, the radiation time may not be extended as desired
within the scope of the permissible radiation doses! There-
fore, only a certain degree of final tanning dependent on the
skin type can be achieved without endangering your health.
To Next Page
Loading...
