User Manual
Step 4
To confirm if the connection was established, check the LEDs. The Power LEDs and the
Powerline Activity LEDs on both HomePlugs are ON.
When the Powerline Activity LED on either HomePlug X or HomePlug Y is off, this means the
pairing is not successful. In this case, you need to redo the entire process again.
Step 5
Unplug the HomePlug AVs and then connect them to your Ethernet devices using the Ethernet
cables from the product package. After connecting the Ethernet cable, plug the HomePlugs directly
to a wall outlet.
An Ethernet-enabled device can be a router, computer, hub, gaming console, IP phone, network
printer, or IP TV set-top box.
Note: HomePlug AVs work best when connected directly to a wall socket. Avoid plugging it to a
power strip or power extension. Other electrical devices in the power strip produce electrical
noise that may affect the performance of the HomePlug.
Page 17 of 43
To Next Page
Loading...