Need help?Do you have a question about the SOMFY animeo IB+ 4 Zone TouchBuco and is the answer not in the manual?
General| Zones | 4 |
|---|---|
| Interface | Touchscreen |
| Manufacturer | SOMFY |
| Product Name | animeo IB+ 4 Zone TouchBuco |
| Power Supply | 24V DC |
| Protection Rating | IP20 |
| Type | Controller |
| Frequency | Not applicable |
| Communication | IB+ |
| Compatibility | animeo IB+ system |
Guide through setup steps.
Select the menu language and units.
Set the current time, date, and time zone.
Enter geographical location for sun-tracking.
Verify motor controller connections and system functionality.
View up-to-date function information and status for selected zones.
Operate motorized products within a single zone.
Simultaneously operate motorized products in all zones.
View and manage outdoor sensor data.
View and manage indoor sensor data.
Record functional modifications and status per zone.
Report system errors and contact specialist for resolution.
Configure alarm triggers and responses.
Configure wind speed thresholds and responses.
Set timed commands for motorized products.
Configure sun tracking and sun protection functions.
Optimize system behavior based on operating modes.
Configure window operation based on temperature.
Select and configure available outdoor sensor types.
Select and configure available indoor sensor types.
Enter geographical location for sun-tracking.
Specify installed product types per zone for accurate operation.
Check motor controller connectivity and functionality.
Assign motor controllers and drives to specific zones.
Set the current time, date, and time zone.
Assign passwords for different access levels.
Manage project files, including new, load, overwrite, USB copy.
Start guided commissioning process for system setup.
To Next Page
