SOMFY Animeo IB+ User Manual

Power
Connector type Quick operation spring-loaded connectors
Number 2 doubled connections (main and through)
Recommended cable
section
Min : 3 x 1.5 mm²
Max : 3 x 2.5 mm²
Dry contact local control
Connector type Quick operation spring-loaded connectors
Number 4
Recommended cable
section
Min : 3 x 0.8 mm²
Max : 3 x 2.5 mm²
Maximum cable length 100m
Control bus
Connector type
Quick operation detachable spring-loaded
connectors
Number 2: doubled connections (main and through)
Recommended cable
section
Min : 4 x 0.8 mm² twisted where possible
Max : 4 x 1.5 mm² twisted where possible
Maximum cable length 1000m
Maximum supported
devices per bus line
100
1860085PN
ANIMEO IB+ MOTOR CONTROLLER 4DC SM
SM Surface mounting version
Accessories:
Animeo 24 VDC/4.5A Power supply (1860093)
Somfy RTS plug-in card (PN 1860105)
Somfy EnOcean plug-in card (PN 1860220)
Functional description
Motor controller for individual or group control of up to 4 Somfy
24V DC standard motors. The Animeo IB+ control bus manages up
to 100 motor controllers per zone, extending the capabilities of
the solar shading management system to the requirements of the
building as to the daylight management strategy and the end user
visual and thermal comfort.
In addition to the network capabilities, this controller can also be
operated locally via a standard hardwired wall switch (dry contact)
or a wireless operated local switch thanks to the range of plug-in
cards available.
outputs
Motor outputs
Conector type Quick operation spring-loaded connectors
Number 4
Supported motors 24V DC standard Somfy motors
Max. number of motors 4
Recommended cable
section
Min : 4 x 0.75 mm²
Max : 4 x 2.5 mm²
Maximum cable length 20m
inputs
quick installation and set up

SOMFY Animeo IB+ Specifications

General

Brand	SOMFY
Model	Animeo IB+
Category	Controller
Language	English

Summary

Functional Description of Motor Controller

Input and Output Connections

Power Input Details

Specifies connector type, number of connections, and recommended cable section for power input.

Local Control Input Specifications

Details on connectors, cable section, and maximum length for dry contact local control.

Control Bus Interface

Information on control bus connectors, cable requirements, and supported devices.

Motor Output Configuration

Details for motor outputs including connector type, supported motors, and cable specifications.

Quick Installation Guide

Detailed Technical Specifications

Power Supply and Consumption

Details on supply voltage, standby current/power, and maximum motor current consumption.

Control Input and Terminal Details

Specifies voltages for group/local control inputs, terminal types, and output protection.

Operating Environment and Physical Attributes

Covers operating temperature, humidity, enclosure material, dimensions, and degree of protection.

Product Conformity and Standards

Details on product compliance with standards like CE EN 60730-1.