SOMFY Chronis io - 5.5. Programming the days of the week

Copyright © 2013 Somfy SAS. All rights reserved.
Chronis io
7
EN
* 
The change-over to summer time takes place on the last Sunday of March and the change-over to
winter time on the last Sunday of October.
 In countries where there is a summer time/winter time clock change, choose "
AUTO TIME SET : YES".
 In countries where there is no summer time/winter time clock change, choose "
AUTO TIME SET : NO".
**
In automatic and simulated presence mode, the "Twilight"
function (
) makes it possible to vary the time an order is
triggered based on the time of sunset on any given date
(see diagram). Indicate the time at which the order is to be
given in June (time at midsummer) and in December (time
at midwinter). The Chronis io will automatically recalculate
the twilight time for the other days of the year.

Chamonix (France): the time in midwinter is 5.25 pm and
the time in midsummer 10.05 pm.

Country City Time in
winter
Time in
summer
Country City Time in
winter
Time in
summer
France Paris 17:33 22:40 Germany Berlin 16:36 22:23
Marseille 17:38 21:58 Austria Vienna 16:39 21:40
Lyon 17:33 22:12 Belgium Brussels 17:18 22:46
Brest 18:02 23:04 Switzerland Bern 17:19 22:08
Bordeaux 17:58 22:29 Netherlands Amsterdam 17:10 22:56
Germany Munich 16:59 21:59 Poland Warsaw 16:06 21:50
Hamburg 16:45 22:26 Spain Madrid 18:22 22:21
Frankfurt 17:04 22:23 Italy Rome 17:13 21:22
Stuttgart 17:06 22:12 Greece Athens 17:39 21:23

The Chronis io makes it possible to send orders automatically to one or more end-products (in
automatic mode
and in simulated presence mode ) once the corresponding programming
has been performed. All these end-products are controlled at the same time.
Up to 4 automatic orders can be programmed for each day of the week.
Each of these automatic orders can be:
 either
, or , or
 
The days of the week can be programmed irrespective of the mode selected using the cursor.
The days of the week are preprogrammed in the factory settings:
- from Monday to Friday,
at 5.30 am, at twilight .
- Saturday and Sunday,
at 8.00 am, at twilight .

1) Press the OK/Menu button .
2) When "
PROG" is displayed, press OK: Monday ( )

3) Press the arrow buttons
h or i to select the day to be
programmed and press OK: "
EDIT 
1)
3)
PROG
PROG
PROG
2)