The CENTRALIS UNO IB VB is an individual control of AC motor with link to master control.
The CENTRALIS UNO IB VB is dedicated to exterior venetian blind application.
inteoCENTRALIS UNO IB VB
INSTALLATION
guide
Ref.9000835
1
Installation:
2
80 mm
80 mm
Characteristics:
33 mm
17 mm
Cabling
Respect the electrical standards in force as well as the following points:
- disconnect the mains before carrying out any work.
- ensure that no forces act on the screw terminals after installation.
- Do not forget to mount the protection cover to separate the cables for the
BUS line and the cables for the power supply.
•
Main supply : 220-240V 50Hz.
•
Class II product
•
Protection index IP40.
•
Output : 250V~ 3A cosφ 0,8.
•
Output temporisation : momentary or fixed (activ for 180s).
•
Environmental conditions for use :
- temperature +5°C to +40°C (no condensation allowed).
- pollution degree typical for usual living space.
EN60730-1
EN50081-1
EN50082-1
Installation allowed only by authorized electrician.
Before connecting the unit, read the instructions carefully.
•
Compatibility with the SOMFY “IB” BUS line (common = +V).
•
Integrated switch to disable the master commands.
•
Possibility to set an intermediate oriented position.
To Next Page
Need help?
General
