Need help?Do you have a question about the SOMFY Maestria WT Series and is the answer not in the manual?
Defines the intended use of MAESTRIA WT drives for exterior vertical blinds, excluding specific systems.
Outlines installer responsibilities, safety compliance, and warranty conditions for the drive.
Details the steps for assembling the drive components and preparing the winding tube.
Covers power supply, switch/control system requirements, and wiring best practices.
Guides on checking rotation direction, setting end limits, and configuring advanced functions.
Provides detailed steps for manually setting the upper and lower end limits of the drive.
Details setting the lower end limit while the upper limit is set automatically.
Explains automatic end limit setting for specific products with heavy load bars and top stops.
Offers guidance on re-setting end limits and troubleshooting common installation issues.
Describes the basic operation of raising or lowering the driven product.
Explains how to stop the driven product using different types of push-button switches.
Details the obstacle detection feature for protecting the driven product and removing obstacles.
Addresses common drive problems like non-operation or issues with obstacle detection.
Lists key technical specifications including power supply, operating temperature, and protection rating.
States compliance with relevant European directives for the drive.
To Next Page
General