SOMFY Orea 60 WT - User Manual

33
Copyright © 2005 - 2014 Somfy SAS. All rights reserved.
EN
Non contractual images
1. Prior information 33
1. 1. Sphere of application 33
1. 2. Liability 33
2. Installation 34
2. 1. Assembly 34
2. 2. Wiring 35
2. 3. Set-up 36
2. 4. Tips and advice on installation 37
3. Operation and maintenance 39
3. 1. Raising and lowering the awning 39
3. 2. STOP function 39
4. Tips and advice on operation 39
5. Technical data 39

position reversing switch control point.
CONTENTS
ORIGINAL INSTRUCTIONS
These instructions apply to all Orea 50 WT, Orea 50 WT RH and Orea 60 WT drives, whatever
the torque/speed combination.
1. PRIOR INFORMATION
1. 1. SPHERE OF APPLICATION
Orea 50, Orea 50 RH and Orea 60 drives are designed to drive all types of outside cassette
awnings that meet at least one of the following conditions:
- The driven product is controlled by a press-and-hold control point (wireless or wired) (see
the enclosed Safety instructions document).
- 
permanent access level.
- The awning is equipped with a safety device that prevents any contact in the shear or crush
zone (a guard that cannot be removed without tools).
1. 2. LIABILITY

the instructions provided in this guide, please also comply with the instructions set out in the
enclosed Safety instructions document.
The drive must be installed by a home motorisation and automation professional, in
accordance with Somfy's instructions and the applicable regulations in the country of
installation.
Any operation of the drive outside the sphere of application described above is prohibited. Such

to comply with the instructions given herein and in the enclosed
Safety instructions document.
After installing the drive, the installer must inform his customers of the operating and maintenance
conditions for the drive and must pass the operating and maintenance instructions on to them, as
well as the enclosed
Safety instructions document. Any After-Sales Service operation on the
drive requires intervention by a home motorisation and automation professional.
Should any doubt arise during installation of the drive or for additional information, consult a Somfy
contact or visit www.somfy.com.
Safety Warning!
1
Caution! 

Summary

Prior Information

Sphere of Application

Specifies the intended applications and types of awnings compatible with the Orea WT drive.

Liability

Outlines installer and user responsibilities, warranty conditions, and prohibitions for drive operation.

Installation

Assembly

Covers checking awning security, drive suitability, and preparation steps for integrating the drive into the winding tube.

Wiring

Details safe routing, protection, and connection of power supply cables to the drive, including diagram and color coding.

Set-up

Explains how to check rotation direction and set the upper and lower end limits for the awning's movement.

Tips and Advice on Installation

Provides troubleshooting guidance for common installation issues and instructions for re-setting end limits.

Operation and Maintenance

Raising and Lowering the Awning

Describes the procedure for operating the awning using the 'Up' and 'Down' buttons on the control point.

Stop Function

Explains how to stop the awning's movement using different types of control points, including push-button operations.

Tips and Advice on Operation

Technical Data

SOMFY Orea 60 WT Specifications

General

Brand	SOMFY
Model	Orea 60 WT
Category	DC Drives
Language	English