Need help?Do you have a question about the SOMFY Sonesse 50 RTS and is the answer not in the manual?
General| Nominal Voltage | 24 VDC |
|---|---|
| Control Protocol | RTS |
| Voltage | 24 V |
| Torque | 6 Nm |
| Speed | 28 rpm |
| Acoustic Level | 44 dBA |
Defines the intended use of the Sonesse 50 motorisation for various indoor window coverings, excluding specific types.
Outlines user responsibilities, prohibited uses, and consequences of non-compliance with installation and usage guidelines.
Provides detailed instructions for the physical installation of the motorisation into the roller tube and bracket system.
Covers the electrical connection procedures, including safety precautions for cable routing and power supply.
Details the process of setting up the motorisation after installation, including programming controls and adjusting limits.
Offers solutions for common installation problems and advice on handling accessories and control points.
Explains the basic motor control using the Up and Down buttons on the remote control.
Describes how to use the 'my' button to stop the motorisation during operation.
Explains how to use the pre-set favourite position for convenient operation.
Refers to external documentation for integrating and operating with a Somfy sun sensor.
Covers advanced configurations such as modifying favourite positions and managing control points.
Provides troubleshooting advice for operational issues and guidance on replacing control points.
To Next Page