Home
SOMFY
DC Drives
Sonesse 50 RTS
SOMFY Sonesse 50 RTS Installation & Programming Guide
84 pages
Manual
Specs
Ask a question
To Next Page
To Next Page
Loading...
Installation/progr
amming
guide
Interior applications
2
Table of Contents
Table of Contents
3
Overview RTS Options
8
Compatibility, Motor-Power Supply-Sensors
9
Power Connections: Applications with RTS Integrated Motors
11
Basic
13
Programming and Setting of RTS Motors
13
Connect the RTS Transmitter to the Motor
13
Check the Motor Rotation Direction
13
Change Motor Rotation Direction if Needed
13
Place the Blind in the Desired up Position
14
Set the down Position
14
Set the up Position
14
Confirm End Limit Setting
14
Recording an RTS Transmitter
14
Adjustments
15
Adjusting the down Limit
15
Adjusting the up Limit
15
Set Blind Mode: Roller or Venetian
16
Setting My Position for NON TILT Products
17
Setting My Position for TILT Products
17
Remove Programmed My Position
17
Wired RTS Receivers, 24 VDC
18
RTS Receivers, Setting and Programming
18
Setting from the RTS Receiver
19
Set the RTS Receiver in Programming Mode
19
Record the First RTS Transmitter
19
Power 4 X 2,5 DC RTS
19
Setting from the RTS Remote Control
20
Set Type of Blind: Roll up or Tilt and Lift
21
Change the Motor Rotation Direction
22
Sett the Time for Open and Close Movement
23
Modify the MY Position, in Tilt & Lift Mode
26
Modify the MY Position, in Roll up Mode
27
Remove a Programmed MY-Position
27
Activating the Motor Run Timer
28
Add a Transmitter
29
Remove an Assigned Transmitter
29
Add or Remove Transmitters
30
Factory Reset
31
Program Individual Channels to Group Channel
32
Sonesse 40 WT, Setting of End Limits
33
Curtain Track
34
Recommendations
34
Motor Cable Output Options
34
Attach Motor to Rail
34
Wiring Guide DCT & RTS
34
Curtain Track Motors RTS, Programming Instruction
35
Connect the RTS Transmitter to the Motor
35
Check the Motor Rotation Direction
35
Change if Needed Motor Rotation Direction
35
Record a RTS Transmitter
35
Setting My Position
36
Re-Adjustment of End -Limits
36
Set Touch Motion or Manual over Ride Mode
37
Set Track Speed, Default Speed = 20 CM/S
38
Add Transmitter
39
Reset Motor to Factory Mode, Erase All Settings
39
Curtain Track DCT Motors, Wiring Control Unit to Glydea DCT
40
Glydea DCT, Programming Instruction
40
Modify Motor Rotation Direction, if Needed
40
Re-Adjustment of End -Limits
40
Set Touch Motion or Manual over Ride Mode
41
Reset Motor to Factory Mode, Erase All Settings
41
Curtain Track WT Motors, Wiring Instruction
42
Programming Instruction
42
Modify Motor Rotation Direction, if Needed
42
Back Release Setting
43
Reset Motor to Factory Mode, Erase All Settings
43
Advanced
44
Sun Sensor Functions
44
Deactivate and Activate Privacy Function
44
Set the Motor Speed
45
Program Sun Disappearing Position
45
Set the Tilt Speed / Scroll Wheel Step
46
Modify Motor Rotation Direction
47
Modify Scroll Wheel Rotation Direction
47
Li-Ion Motors
49
Activate/Deactivate RTS
49
Temporary Sleeping Mode
50
How to Replace Battery
51
Sonesse 30 DCT
52
Wiring
52
Setting Type of Blind
52
Setting of Rolling Speed
52
Setting of Tilt Speed
53
Reset Motor in Factory Mode
53
Wired Controls for Roll up Application
54
Setting of My Positions
54
Wired Control for Tilt & Lift Applications
55
Adjust Tilt Speed
55
Set Automatic Slat Tilting
55
Set My Position - from up End Limit
55
Sunis RTS, Adding and Setting
56
Connect Sun Sensor
57
Check Sun Mode on or off
58
Check and Installation
59
Set the Demo Mode on
59
Switch the Demo Mode off
60
Explanations of LED Signals
61
Is the Sunis Sensor RTS in DEMO-Mode
61
Thermosunis Indoor Wirefree RTS, Adding and Setting
62
Thermosunis Indoor Wirefree RTS
63
Connect Sun Sensor
63
Mounting of Thermosunis Indoor Wire Free RTS
64
Usage Options for Thermosunis Indoor Wirefree RTS
64
Get Started with Thermosunis Indoor Wire Free RTS
65
Activate the Sensor
66
Erase the Sensor from the Motor
67
Setting of the Sensitivity (Threshold Values)
68
DEMO Mode
69
Sunis Wirefree II Io Sensor
70
Description
70
Program the Sensor on a Motor with a 1-Way Transmitter
71
Programming Moco DCE
73
To Change to Lift Application
73
Setting of End Limits
74
Tahoma
75
Composition
75
Connect the Box
75
Create Your Account
75
Configure Your Connected Home
76
Add Devices
76
Connexoon Window RTS
77
Product Components
77
To Add Products (Without Internet Connection)
77
Select One of the 6 Channels
78
To Register the Connexoon
79
Other manuals for SOMFY Sonesse 50 RTS
Operating And Installation Guide
20 pages
Installation Guide
44 pages
Installation And Operating Guide
20 pages
Universal Quick Programming Guide
2 pages
Need help?
Do you have a question about the SOMFY Sonesse 50 RTS and is the answer not in the manual?
Ask a question
SOMFY Sonesse 50 RTS Specifications
General
Nominal Voltage
24 VDC
Control Protocol
RTS
Voltage
24 V
Torque
6 Nm
Speed
28 rpm
Acoustic Level
44 dBA
Related product manuals
HOME MOTION Sonesse 50 RS485
40 pages
SOMFY Sonesse Ultra 50 RS485
12 pages
SOMFY Sonesse 28 WireFree RTS
18 pages
SOMFY Sunea 50 CSI io
104 pages
SOMFY Orea 50 WT
8 pages
SOMFY ilmo2 50 WT
80 pages
SOMFY ILMO2 50 io
84 pages
SOMFY ALTUS RS 50 io
100 pages
SOMFY SOLUS P&P
92 pages
SOMFY S&SO-RS100 io
44 pages
SOMFY Sonesse ULTRA 50 RTS
34 pages
SOMFY Orea 60 WT
8 pages
Need help?
General
To Next Page