SOMFY Nina Timer io User Manual

27
CONTENTS
WELCOME 2
1. SAFETY 3
2. NINA TIMER IO REMOTE CONTROL 5
3. USING NINA TIMER IO 16
Control an item of equipment 16
My function 18
Natural Control function 22
Launch a scenario 27
Sunlight Function 28
Alarm function 32
Timer function 34
Create typical days 39
Program the week 57
View programmed actions 60
4. CUSTOMIZING NINA TIMER IO 68
Customize items of equipment 68
Customize groups 72
Customize scenarios 78
Define timer settings 83
Customize remote control 88
5. ADVANCED SETTINGS 94
6. TROUBLESHOOTING 107
7. ABOUT NINA TIMER IO 108
Copyright © 2017 - 2021 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved.
Launch a scenario
1. Select the Groups menu by clicking on the
corresponding icon.
2. Select the room or the group containing the
item of equipment to control by clicking on the
corresponding icon.
You can access all the rooms and groups using
the navigation buttons or the swipe.
> The scenarios available for controlling the
selected room/group are displayed.
3. Select the scenario by clicking on the
corresponding icon or name.
4. The action starts once the button is released:
> A wheel and a STOP button are displayed when
the action is ongoing (A). Click on this button to
stop the action at any time.
> A tick mark is displayed for few seconds when
the action is completed (B).
If a problem occurs, the detected fault is
displayed and you can start the launching the
scenario again.
Scenarios defined by default at installation:
Open/Close Open/Close all
Switch on/Switch off Raise/Lower
My position / (if the installation contains one or two sensors)
To access all the functions to customise a scenario, see Customize scenarios, page 78.
Equipment
Groups
Timer
12:34
1
2
3
A B
4

SOMFY Nina Timer io Specifications

General

Brand	SOMFY
Model	Nina Timer io
Category	Remote Control
Language	English