SOMFY Telis 1 RTS Pure User Manual

BACK
SOMFY INSTRUCTIONS
TELIS RTS REMOTE CONTROLS
SINGLE & FIVE CHANNEL
Part #’s
1810632 Telis 1 RTS Pure
1810633 Telis 5 RTS Pure
1810639 Telis 1 RTS Silver
1810641 Telis 5 RTS Silver
1810650 Telis 1 RTS Lounge
1810652 Telis 5 RTS Lounge
1810643 Telis 1 RTS Patio
1810645 Telis 5 RTS Patio
my
Channel
Selector
Programming
Button
UP
STOP
DOWN
BACKFive Channel
Version
my
UP
STOP
DOWN
Single Channel
Version
LED
Indicator
Light
LED Lights
PROGRAMMING – ADDING A NEW REMOTE OR OPERATING CHANNEL
Adding a Telis 1 RTS Transmitter only:
1. Using the previously programmed Telis
remote, press and hold the programming
button on back of remote until
window covering “jogs.”
Adding a Telis 5 RTS Transmitter only:
1. Using the previously programmed Telis
remote, press and hold the programming
button on back of remote until window
covering “jogs.”
2. Using the new Telis 1 remote,
briefly press the programming
button until the window covering
“jogs.” Window covering has
now learned the commands of
the new Telis remote.
A previously programmed remote can be used in order to add a new remote or channel to the Motorized Window Covering.
If a Telis Transmitter has not been previously programmed, please refer to the installation instructions of the relevant RTS
motorized window covering.
C-0001
Pen
BACK VIEW
Programming
Button
Pen
BACK VIEW
Programming
Button
Pen
2. Using the new Telis 5 remote, select
the desired channel using the CHANNEL
SELECTOR BUTTON. (The LED will illuminate
each time the Channel Selector Button is
pressed, indicating the selected channel)
3. Using the Telis 5 remote, briefly press the
programming button until the motorized
window covering “jogs”. The RTS motorized
window covering has now learned the
commands of the new Telis 5 remote.
Previously
programmed remote
New Telis 1
remote to be added
my
Channel
Selector
BACK VIEW
Programming
Button
Pen
PAGE 1 REV 6
LED Lights
New Telis 5
remote to
be added
BACK VIEW
Programming
Button
Pen
Previously
programmed remote

SOMFY Telis 1 RTS Pure Specifications

General

Type	Remote Control
Frequency	433.42 MHz
Channels	1
Battery Life	2-3 years
Compatibility	Compatible with all RTS motors and receivers
Range	65 ft (20 m)

Summary

Telis RTS Remote Controls: Single & Five Channel

Part Numbers

Lists the specific part numbers for various Telis RTS remote control models.

Single Channel Version Overview

Details the features and appearance of the Telis RTS single channel remote control.

Five Channel Version Overview

Details the features and appearance of the Telis RTS five channel remote control.

Programming: Adding a New Remote or Operating Channel

Adding a Telis 1 RTS Transmitter

Step-by-step guide to program a new Telis 1 RTS transmitter to a window covering.

Adding a Telis 5 RTS Transmitter

Step-by-step guide to program a new Telis 5 RTS transmitter to a window covering.

Programming: Setting a Favorite Position (MY)

Telis 1 RTS: Set Favorite Position

Instructions for setting a custom favorite position using the Telis 1 RTS transmitter.

Telis 5 RTS: Set Favorite Position

Instructions for setting a custom favorite position using the Telis 5 RTS transmitter.

Operating the Motorized Window Covering

Telis 1 RTS Operation

Basic operation of the window covering using the Telis 1 RTS transmitter.

Telis 5 RTS Operation

Basic operation of the window covering using the Telis 5 RTS transmitter.

Replacing the Battery

Battery Replacement Procedure

Instructions on how to open the remote and replace the battery with a new one.