14
ALARM TEST
1. Check the red operating LED ashes once
every 45 seconds in standby mode.
2. Briey press the test button in the centre
and release.
3. An audible alarm consisting of two cycles of
three loud beeps should occur and then stop
automatically.
4. The red LED on the alarm will ash rapidly
during the audible signal.
• Remove the dust cover from each alarm
before use.
• Test the alarms on a weekly basis.
• Keep this guide in a safe place for
future reference.
• Test all alarms after repositioning large items
of furniture to ensure they still work.
Dust cap
USER GUIDE
To Next Page
Loading...