27
V 1.0
RELAY CONTROLLERS
Relay Controllers are an optional accessory for the Audio On Demand system and may be
added at any time. They are easily configured and may be used with macros for sophisticated
control of theater systems, lighting, and draperies, rack cooling systems, and screen lifts, just
to name a few.
Relay Controller Configuration Tips
Generate network traffic by pressing the reset button located on the back of the controller.
When the button is released, network traffic is generated, and the Network Diagnostic
Analyzer will flash and optionally beep.
The Network Diagnostic Analyzer will need to be set to "capture mode" to capture and dis-
play the DIP switch settings for the Relay Controller.
To Next Page
Loading...
