VPXT6R / VPXT6R SST
VISUAL PERFORMANCE
®
EXTREME
INSTALLATION QUICKSTART GUIDE
1. Connect speaker wires to spring terminals.
2. Double check that the positive wire (+) is connected
to the positive connector (+) and the negative wire (-)
is connected to the negative connector (-).
3. Insert speaker into the hole.
4. Tighten Roto-Lock
®
screws using low-torque setting
on your screw gun. NEVER OVER TIGHTEN.
5. Attach grille.
Note: Please see manual for grille painting instructions
at www.sonance.com
To Next Page
Need help?
General