Sonel PAT-1 Manual

Sonel PAT-10 / 2E / 2
Portable Appliance Tester
First steps
v1.01 | 08.03.2019
Turn the tester on Select rmware language Congure the tester
Connect the tested object Select the test procedure Obtain the test result and save it
2 s
Turn off Turn on while
holding SET/SEL
Switch parame-
ters to change
Choose settings Exit settings
Manual tests
▪ switch subsequent test modes
Autotests
▪ class I appliances
Autotests
▪ class II and III appliances
Autotests
▪ IEC power cords
Autotests
▪ portable RCD breakers
Positive
result
Negative
result
Select the memory
bank and cell
Enter the
mode of
data saving
Save
the result
Time to the next performance of tests
Autotests
Audio messages
Auto-off time
Wireless communication
Report printing
Automatic report printing
Printer conguration
Voltage of the power supply network
Frequency of the power supply network
L-N circuit resistance measurement
Reaction for swapped L and N lines
Date DD/MM/RRRR
Time HH/MM
Restoring
factory settings
Firmware update
Run
the test

Sonel PAT-1 Specifications

General

Brand	Sonel
Model	PAT-1
Category	Measuring Instruments
Language	English